CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or
more trained personnel to lift it safely.
CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware
or memory devices sometime after setting up the printer, then turn the printer o, and unplug the power
cord from the electrical outlet before continuing. If you have any other devices attached to the printer,
then turn them o as well, and unplug any cables going into the printer.
1 Unpack the optional 650‑sheet duo tray, and then remove all packing material and the dust cover.
2 Place the tray in the location chosen for the printer.
3 Align the printer with the 650‑sheet duo tray, and then lower the printer into place.
Additional printer setup 17
To Next Page
Loading...
