Use To
O Use the factory default settings for all settings associated with Eco‑Mode. This setting supports
the performance specifications for your printer.
Energy Reduce energy use, especially when the printer is idle.
• Printer engine motors do not start until a document is ready to print. You may notice a short
delay before the
first
page is printed.
• The printer enters Sleep mode after one minute of inactivity.
Energy/Paper Use all the settings associated with Energy and Paper modes.
Paper
• Enable the automatic two‑sided (duplex) printing feature.
• Turn o print log features.
2 Press .
Reducing printer noise
Use Quiet Mode to reduce the printer noise.
1 From the printer control panel, navigate to:
> Settings > > General Settings > > Quiet Mode > > select a setting you want
Use To
On Reduce printer noise.
• Print jobs will process at a reduced speed.
• Printer engine motors do not start until a document
is ready to print. There is a short delay before the
first
page is printed.
• The alarm control and cartridge alarm sounds are
turned
o.
• The printer will ignore the Advance Start command.
O Use factory default settings. This setting supports the
performance specifications of the printer.
Note: Selecting Photo from the printer driver may
disable Quiet Mode and provide better print quality
and full speed printing.
2 Press .
Adjusting Sleep mode
To save energy, decrease the number of minutes before the printer enters Sleep mode. You can choose from
1 to 60 minutes. The factory default setting is 30 minutes.
Using the Embedded Web Server
1
Open a Web browser, and then type the printer IP address in the address
field.
Saving money and the environment 89
To Next Page
Loading...
