Lexmark CS410 - Itf-14

Two-dimensional bar codes
93
ITF-14
Key Type Range Default value Description
/Symbology name n/a n/a Required
Identifies the bar code symbology
(/ITF14)
/Units name /300ths
/600ths
/1200ths
/600ths Optional
/Units is used in the calculations
below
/Height int Minimum:
307 (dec)
01 33 (hex)
Maximum: 
There is no
maximum value,
but larger bar
codes use up
more memory.
756 (dec)
02 F4 (hex)
Optional
Sets the bar height in /Units
Notes:
• Bar height does not include the
bearer bars.
• Values beyond the defined
range are appropriately clipped
and set to the minimum and
maximum values.
/Bars [int int] Minimum: 
[12 27] (dec)
Maximum: 
[24 72] (dec)
[12] (dec)
[00 0C] (hex)
Optional
Sets the bar widts in /Units
Notes:
• The default value for Bar Width
2 is dependent on the value of
Bar Width 1, where
Default=2.50 x Bar Width 1.
• The range of values for Bar
Width 2 is dependent on the
value of Bar Width 1, where,
Min=2.25 x Bar Width 1 and
Max=3 x Bar Width 1.
• Values beyond the defined
range are appropriately clipped
and set to the minimum and
maximum values.
/Spaces [int int] Minimum:
[12 27] (dec)
Maximum: 
[24 72] (dec)
Space Width 1:
12 (dec)
00 0C (hex)
Optional
Sets the space widths in /Units
Notes:
• The range of values for Space
Width 2 is dependent on the
value of Space Width 1, where
Min=2.25 x Space Width 1 
Max=3 x Space Width 1.
• Values beyond the defined
range are appropriately clipped
and set to the minimum and
maximum values.