4 Squeeze, and then slide the width guide tab to the correct position
for the size of the paper being loaded.
2
1
Note: Use the paper size indicators on the bottom of the tray to
help position the guides.
5 Flex the sheets back and forth to loosen them, and then fan them.
Do not fold or crease the paper. Straighten the edges on a level
surface.
6 Load the paper stack with the recommended printable side faceup.
7 Place the paper guides securely against the edges of the paper.
8 Insert the tray.
9 From the printer control panel, set the paper size and paper type
in the Paper menu to match the paper loaded in the tray.
Note: Mixing paper sizes or paper types in a tray may cause
jams.
Loading the 650‑sheet duo tray
The 650‑sheet duo tray (Tray 2) consists of a 550‑sheet tray and an
integrated 100‑sheet multipurpose feeder. The tray is loaded in the
same way as the 250‑sheet tray and the optional 550‑sheet tray, and
supports the same paper types and sizes. The only differences are the
look of the guide tabs and the location of the paper size indicators.
CAUTION—POTENTIAL INJURY: To reduce the risk of
equipment instability, load each tray separately. Keep all other
trays closed until needed.
1
2
3
1 Length guide tab
2 Paper size indicator
3 Width guide tab
3
To Next Page
Loading...
