Lexmark CS720 Series User Manual

5 Reattach the access cover.
6 Connect the power cord to the electrical outlet, and then turn on the printer.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord
to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.
Installing an internal solutions port
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, if you are accessing the controller
board or installing optional hardware or memory devices sometime after setting up the printer, then turn
the printer o, and unplug the power cord from the electrical outlet before continuing. If you have any
other devices attached to the printer, then turn them o as well, and unplug any cables going into the
printer.
1 Turn
o
the printer, and then unplug the power cord from the electrical outlet.
2 Using a flat‑head screwdriver, remove the controller board access cover.
Warning—Potential Damage: Controller board electronic components are easily damaged by static
electricity. Touch a metal surface on the printer before touching any controller board electronic
components or connectors.
Upgrading and migrating 96

Lexmark CS720 Series Specifications

General

Print Technology	Color Laser
Print Resolution	Up to 1200 x 1200 dpi
Duplex Printing	Standard
Processor Speed	1.2 GHz
Print Speed	Up to 38 ppm
Memory	1 GB
Paper Input Capacity	650 sheets (standard)
Connectivity	USB, Gigabit Ethernet
Mobile Printing	AirPrint, Mopria, Lexmark Mobile Print
Operating Systems Supported	Windows, Mac, Linux
Dimensions	442 x 407 x 476 mm
Weight	30.9 kg
Recommended Monthly Page Volume	Up to 15, 000 pages