5 Insert the new fuser.
6 Close doors D and A.
7 Connect the power cord to the electrical outlet, and then turn on the printer.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord
to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.
8 Reset the fuser maintenance counter.
For more information, see
“Resetting the maintenance counter” on page 61.
Replacing the pick roller
Replacing the pick roller in the 550‑sheet tray
1
Turn o the printer, and then unplug the power cord from the electrical outlet.
2 Remove the tray.
Maintaining the printer 52
To Next Page
Loading...
Need help?
General
