4
Open the tray cover.
5
Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
6
Close the tray cover.
Paper jam in the multipurpose feeder
1
Remove paper from the multipurpose feeder.
2
Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
3
Open door B, and then remove any paper fragments.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching
it.
4
Close door B.
5
Flex, fan, and align the paper edges before loading.
6
Reload paper.
Paper jam in the standard bin
1
Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
2
Open door B, and then remove any paper fragments.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching
it.
4
To Next Page
Loading...
