3
Close door B.
Paper jam in door B
Paper jam in the fuser
1
Open door B.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching
it.
2
Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
3
Open the fuser access door.
4
Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
5
Close door B.
Paper jam in the duplex unit
1
Open door B.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching
it.
2
Remove the jammed paper.
5
To Next Page
Loading...
