Printer configurations
CAUTION—TIPPING HAZARD: Installing one or more options on your printer or MFP may require a
caster base, furniture, or other feature to prevent instability causing possible injury. For more information
on supported configurations, see
www.lexmark.com/multifunctionprinters.
CAUTION—TIPPING HAZARD: To reduce the risk of equipment instability, load each tray separately.
Keep all other trays closed until needed.
You can configure your printer by adding an optional 650‑sheet duo tray or a 550‑sheet tray. For more
information, see
“Installing optional trays” on page 242.
1 Automatic document feeder (ADF)
2 ADF tray
3 Standard bin
4 ADF bin
5 Standard 250‑sheet tray
6 Optional 650‑sheet duo tray
Note: This tray is available only in some printer models.
Learning about the printer 13
To Next Page
Loading...
