Lexmark CX421 - E-mailing; Setting Up the E-mail Function; Sending an E-mail

E-mailing
Setting up the e‑mail function
1 Open a web browser, and then type the printer IP address in the address field.
Notes:
• View the printer IP address on the home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
• If you are using a proxy server, then temporarily disable it to load the web page correctly.
2 Click Settings > E‑mail > E‑mail Setup.
3
Configure
the settings.
4 Apply the changes.
Configuring e‑mail settings
1 Open a Web browser, and then type the printer IP address in the address field.
Notes:
• View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
• If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2 Click Settings > E-mail.
3 Enter the needed information.
4 Apply the changes.
Sending an e-mail
1 Load an original document into the ADF tray or on the scanner glass.
2 From the control panel, select E-mail, and then enter the needed information.
For non‑touch‑screen printer models, press #, and then enter the shortcut number using the keypad.
Note: You can also enter the recipient using the address book.
3 If necessary, configure the output file type settings.
4 Send the e-mail.
Creating an e-mail shortcut
Note: You may need administrative rights to create a shortcut.
1 Open a web browser, and then type the printer IP address in the address field.
E-mailing 50