3 Select Scan to USB and adjust the settings if necessary.
Note: If the USB Drive screen does not appear, then select USB Drive on the control panel.
4 Scan the document.
Warning—Potential Damage: To avoid loss of data or printer malfunction, do not touch the flash drive or
the printer in the area shown while actively printing, reading, or writing from the memory device.
Sending scanned documents to a computer
1 Load an original document into the ADF tray or on the scanner glass.
2 From the control panel, navigate to:
Scan Profiles > Scan to Computer
For non-touch-screen printer models, press
to navigate through the settings.
3 Select the scan profile where you want to save the document.
Scanning to a Cloud Connector profile
1 Load the document into the ADF tray or on the scanner glass.
2 From the home screen, touch Cloud Connector.
3 Select a cloud service provider, and then select a profile.
Note: For more information on creating a Cloud Connector
profile,
see
“Creating a Cloud Connector
profile” on page 23.
4 If necessary, select a folder.
5 Touc h Scan.
6 If necessary, change the scan settings.
7 To uc h Scan.
Scanning 62
To Next Page
Loading...
