Loading the manual feeder
1 Adjust the guide to match the size of the paper that you are loading.
2 Load a sheet of paper with the printable side facedown.
• Load letterhead with the printable side facedown and the top edge entering the printer first for one‑sided
printing.
• Load letterhead with the printable side faceup and the top edge entering the printer last for two‑sided
printing.
• Load envelope with the flap side up and against the right side of the paper guide.
3 Feed the paper until its leading edge gets pulled in.
Warning—Potential Damage: To avoid paper jams, do not force paper into the manual feeder.
Linking trays
1 Open a web browser, and then type the printer IP address in the address field.
Loading paper and specialty media 34
To Next Page
Loading...
