Lexmark CX930 - Using Offset Stacking in Copies; Creating a Copy Shortcut

Using oset stacking in copies
1 Load an original document into the ADF tray or on the scanner glass.
Note: To avoid a cropped image, make sure that the original document and output have the same paper
size.
2 From the home screen, touch Copy, and then specify the number of copies.
If necessary, adjust the copy settings.
3 Touc h Oset Pages, and then select a setting.
4 Copy the document.
Creating a copy shortcut
1 From the home screen, touch Copy.
2
Configure
the settings, and then touch
.
3 Create a shortcut.
Copy 166