Lexmark CX930 - Loading Paper and Specialty Media

Setting Value
Reply Address Your e‑mail address
SMTP Server Authentication Login / Plain
Device‑Initiated E‑mail Use Device SMTP Credentials
Device UserID Yo u r e ‑mail address
Device Password Account password or app password
Notes:
• For accounts with two‑step verification disabled, use your account
password.
• For accounts with two‑step verification enabled, use an app password. To
create an app password, go to the
Zoho Mail Account Security page, log
in to your account, and then from the Application‑Specific Passwords
section, click Generate New Password.
Loading paper and specialty media
Setting the size and type of the specialty media
The trays automatically detect the size of plain paper. For specialty media like labels, card stock, or envelopes,
do the following:
1 From the home screen, touch Settings > Paper > Tray Configuration > Paper Size/Type > select a paper
source.
2 Set the size and type of the specialty media.
Configuring Universal paper settings
1 From the home screen, touch Settings > Paper > Media
Configuration
> Universal Setup.
2 Configure the settings.
Enabling the Multiple Universal Sizes setting
1 From the home screen, touch Settings > Device > Maintenance >
Configuration
Menu > Tray
Configuration
.
2 Enable the Multiple Universal Sizes setting.
Loading the 520-sheet tray
CAUTION—TIPPING HAZARD: To reduce the risk of equipment instability, load each tray separately.
Keep all other trays closed until needed.
1 Pull out the tray.
Note: To avoid jams, do not pull out trays while the printer is busy.
Set up, install, and configure 55