Fax Receive Settings
Menu item Description
Fax Job Waiting
None*
To ne r
Toner and Supplies
Remove fax jobs that request specific unavailable resources from the print
queue.
Rings to Answer
1–25 (3*)
Set the number of rings before the device answers incoming calls.
Auto Reduction
On*
O
Scale incoming fax to fit on the page.
Paper Source
Tray [X]
Auto*
Set the paper source for printing incoming fax.
Sides
On
O*
Print on both sides of the paper.
Separator Sheets
None*
Before Job
After Job
Specify whether to insert blank separator sheets when printing.
Separator Sheet Source
Tray [X] (1*)
Specify the paper source for the separator sheet.
Output Bin
Standard Bin
Specify the output bin for received faxes.
Fax Footer
On
O*
Print the transmission information at the bottom of each page from a received
fax.
Fax Footer Time Stamp
Receive*
Print
Print the time stamp at the bottom of each page from a received fax.
Punch
O*
2 holes
3 holes
4 holes
Specify the hole punch function for incoming faxes.
Note: This menu item appears only when a staple, hole punch finisher is
installed.
Staple
O*
1 staple
2 staples
4 staples
Specify the staple function for incoming faxes.
Note: This menu item appears only when a staple
finisher
is installed.
Note: An asterisk (*) next to a value indicates the factory default setting.
Use printer menus 214
To Next Page
Loading...
