Lexmark CX930 - Page 25

Paper size Staple finisher Staple, hole punch finisher
Stack Oset Staple Stack Oset Staple Hole punch
10 Envelope
104.8 x 241.3 mm
(4.12 x 9.5 in.)
XXXXXX
B5 Envelope
176 x 250 mm
(6.93 x 9.84 in.)
2
XXXXXX
C5 Envelope
162 x 229 mm
(6.38 x 9.01 in.)
1
XXXXXX
DL Envelope
110 x 220 mm
(4.33 x 8.66 in.)
XXXXXX
1
Loads only in short‑edge orientation.
2
Loads only in long‑edge orientation.
3
Supports paper sizes ranging from 88.9 x 98.38 mm (3.5 x 3.87 in.) to 296.93 x 431.8 mm (11.69 x 17 in.).
4
Supports paper sizes ranging from 190 x 139.7 mm (7.48 x 5.5 in.) to 296.93 x 431.8 mm (11.69 x 17 in.).
5
Supports paper sizes ranging from 202.9 x 182.03 mm (7.99 x 7.17 in.) to 296.93 x 431.8 mm (11.69 x 17 in.).
6
Supports only up to 2‑hole punching.
7
Supports only up to 2‑hole punching when loaded in short‑edge orientation.
8
Supports paper sizes ranging from 88.9 x 98.38 mm (3.5 x 3.87 in.) to 320.04 x 1320.8 mm (12.6 x 52 in.).
9
Supports paper sizes ranging from 209.97 x 148 mm (8.27 x 5.83 in.) to 296.93 x 431.8 mm (11.69 x 17 in.).
Supported paper types
Paper types supported by the standard tray, MPF, envelope tray, and two‑sided printing
Paper type Standard
520‑sheet tray
Multipurpose feeder Envelope tray Two‑sided printing
Bond
X
Card Stock X
Colored Paper X
Custom Type X
Envelope X X
Glossy
X
Heavy Glossy X
Heavy Paper X
Learn about the printer 25