Lexmark CX930 User Manual

CAUTION—POTENTIAL INJURY: Do not cut, twist, bind, crush, or place heavy objects on the power
cord. Do not subject the power cord to abrasion or stress. Do not pinch the power cord between objects
such as furniture and walls. If any of these things happen, a risk of fire or electrical shock results. Inspect
the power cord regularly for signs of such problems. Remove the power cord from the electrical outlet
before inspecting it.
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, make sure that all external
connections (such as Ethernet and telephone system connections) are properly installed in their marked
plug-in ports.
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, if you are accessing the controller
board or installing optional hardware or memory devices sometime after setting up the printer, then turn
the printer o, and unplug the power cord from the electrical outlet before continuing. If you have any
other devices attached to the printer, then turn them o as well, and unplug any cables going into the
printer.
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, do not use the fax feature during a
lightning storm.
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock when cleaning the exterior of the
printer, unplug the power cord from the electrical outlet and disconnect all cables from the printer before
proceeding.
CAUTION—POTENTIAL INJURY: If the printer weight is greater than 20 kg (44 lb), then it may require
two or more people to lift it safely.
CAUTION—POTENTIAL INJURY: When moving the printer, follow these guidelines to avoid personal
injury or printer damage:
• Make sure that all doors and trays are closed.
• Turn o the printer, and then unplug the power cord from the electrical outlet.
• Disconnect all cords and cables from the printer.
• If the printer has separate floor-standing optional trays or output options attached to it, then disconnect
them before moving the printer.
• If the printer has a caster base, then carefully roll it to the new location. Use caution when passing over
thresholds and breaks in
flooring.
• If the printer does not have a caster base but is configured with optional trays or output options, then remove
the output options and lift the printer
o
the trays. Do not try to lift the printer and any options at the same
time.
• Always use the handholds on the printer to lift it.
• Any cart used to move the printer must have a surface able to support the full footprint of the printer.
• Any cart used to move the hardware options must have a surface able to support the dimensions of the
options.
• Keep the printer in an upright position.
• Avoid severe jarring movements.
• Make sure that your fingers are not under the printer when you set it down.
• Make sure that there is adequate clearance around the printer.
CAUTION—TIPPING HAZARD: Installing one or more options on your printer or MFP may require a
caster base, furniture, or other feature to prevent instability causing possible injury. For more information
on supported configurations, see
www.lexmark.com/multifunctionprinters.
Safety information 7

Lexmark CX930 Specifications

General

Color	Yes
Print technology	Laser
Maximum resolution	2400 x 600 DPI
Duplex printing mode	Auto/Manual
Time to first page (black, normal)	8.5 s
Time to first page (color, normal)	8 s
Print speed (black, normal quality, A4/US Letter)	25 ppm
Printer fonts	Bitmap, PCL, PPDS, PostScript, Scalable
Printing colors	Cyan, Magenta, Yellow
Maximum duty cycle	100000 pages per month
Recommended duty cycle	4000 - 20000 pages per month
Number of print cartridges	4
Page description languages	HTML Direct Image Space, PCL 5, PCL 6, PCLm, PDF 1.7, PPDS, PostScript 3
Total input capacity	520 sheets
Total output capacity	400 sheets
Maximum input capacity	5140 sheets
Total number of input trays	1
Multi-Purpose tray input capacity	100 sheets
Envelopes sizes	7 3/4, B5, DL
Paper tray media types	Card stock, Envelopes, Glossy paper, Labels, Plain paper
Paper tray media weight	60 - 256 g/m²
Non-ISO print media sizes	Executive (184 x 267mm), Folio (media size), Hagaki card, Ledger (media size), Legal (media size), Letter (media size), Statement (140 x 216mm)
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO C-series sizes (C0...C9)	C4, C5
JIS B-series sizes (B0...B9)	B4, B5
Maximum ISO A-series paper size	A4
USB connector	USB Type-A / USB Type-B
USB 2.0 ports quantity	3
Wi-Fi	No
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Sound power level (standby)	15 dB
Sound power level (printing)	48 dB
Control type	Buttons, Touch
Product color	Black, White
Display diagonal	7 \
Market positioning	Business
Power consumption (off)	0.1 W
Power consumption (ready)	72 W
Power consumption (printing)	381 W
Power consumption (PowerSave)	1.1 W
Other operating systems supported	Android, Citrix, Novell
Operating altitude	0 - 2500 m
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	8 - 80 %
Sustainability certificates	BSMI, C-TICK, CB, CCC, CE, CECP, China Energy Label (CEL), China Green Product (CGP), EFTA, ENERGY STAR, EPEAT, EuP, Federal Communications Commission (FCC), GS mark, Green Dot, ICES, KC, Mopria Certified, Norma Oficial Mexicana (NOM), UL ECOLOGO, US FDA, VCCI, cUL
Package depth	764 mm
Package width	1009 mm
Package height	811 mm
Package weight	81700 g
Included cartridge capacity (CMY)	5000 pages
Included cartridge capacity (black)	52000 pages

Weight and Dimensions

Depth	590 mm
Width	767.9 mm
Height	699.3 mm