Lexmark CX943 - Page 27

Paper size Staple finisher Staple, hole punch finisher
Stack Oset Staple Stack Oset Staple Hole punch
DL Envelope
110 x 220 mm
(4.33 x 8.66 in.)
XXXXXX
1
Loads only in short‑edge orientation.
2
Loads only in long‑edge orientation.
3
Supports paper sizes ranging from 88.9 x 98.38 mm (3.5 x 3.87 in.) to 296.93 x 431.8 mm (11.69 x 17 in.).
4
Supports paper sizes ranging from 190 x 139.7 mm (7.48 x 5.5 in.) to 296.93 x 431.8 mm (11.69 x 17 in.).
5
Supports paper sizes ranging from 202.9 x 182.03 mm (7.99 x 7.17 in.) to 296.93 x 431.8 mm (11.69 x 17 in.).
6
Supports only up to two‑hole punching.
7
Supports only up to two‑hole punching when loaded in short‑edge orientation.
8
Supports paper sizes ranging from 88.9 x 98.38 mm (3.5 x 3.87 in.) to 320.04 x 1320.8 mm (12.6 x 52 in.).
9
Supports paper sizes ranging from 209.97 x 148 mm (8.27 x 5.83 in.) to 296.93 x 431.8 mm (11.69 x 17 in.).
Paper sizes supported by the trifold/Z‑fold finisher and the booklet finisher
Paper size Trifold/Z‑fold finisher Booklet finisher
Trifold Z‑fold Stack Oset Staple Hole punch Fold
A3
297 x 420 mm
(11.69 x 16.54 in.)
XX
1 1
X
1
X
A4
210 x 297 mm
(8.27 x 11.7 in.)
X
X X
A5
148 x 210 mm
(5.83 x 8.27 in.)
XX XX
3
X
A6
105 x 148 mm
(4.13 x 5.83 in.)
XX
1
XXXX
Arch B
304.8 x 457.2 mm
(12 x 18 in.)
XX
XXXX
1
Loads only in short‑edge orientation.
2
Loads only in long‑edge orientation.
3
Supports only up to two‑hole punching when loaded in long‑edge orientation.
4
Supports paper sizes ranging from 202.9 x 181.86 mm (7.99 x 7.16 in.) to 320.04 x 482.94 mm (12.6 x 19.01 in.).
5
Supports paper sizes ranging from 202.9 x 181.86 mm (7.99 x 7.16 in.) to 296.93 x 431.8 mm (17 x 11.69 in.)
Learn about the printer 27