32
Understanding printer messages
39 Complex Page The page may not print correctly because the print information on the page is too
complex.
• Press to clear the message and continue printing the job. The job may not print
correctly.
• Press to open the Job Menu and cancel the current job.
• To avoid this error in the future:
– Reduce the complexity of the page by reducing the amount of text or graphics on
the page and deleting unnecessary downloaded fonts or macros.
– Set Page Protect to On in the Setup Menu.
– Install additional printer memory.
42 Cartridge Region Mismatch The geographic region of the printer does not match the geograhpic region of the
installed toner cartridge. Remove the toner cartridge and install a new cartridge that
matches the region of the printer.
50 PPDS font error • To clear the message and continue printing, press .
The job may not print correctly.
• Cancel the current job.
51 Defective flash To clear the message and continue printing, press .
You must install different flash memory before you can download any resources to
flash.
52 Flash full • To clear the message and continue printing, press .
Downloaded fonts and macros not previously stored in flash memory are deleted.
• Delete fonts, macros, and other data stored on the flash memory.
• Install a larger capacity flash memory card.
53 Unformatted flash To clear the message and continue printing, press .
You must format the flash memory before you can store any resources on it. If the
error message remains, the flash memory may be defective and require replacing.
54 Std network software error • To clear the message and continue printing, press .
The job may not print correctly.
• Program new firmware for the network interface.
• Reset the printer.
55 Unsupported flash in slot <x> 1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
3 Remove the unsupported option.
4 Plug in the power cord.
5 Turn the printer on.
56 Std parallel port disabled • To clear the message, press .
• The printer discards any data received through the parallel port.
• Make sure the Parallel Buffer menu item is not set to Disabled.
56 Standard USB port disabled • To clear the message, press .
The printer discards any data received through the USB port.
• Make sure the USB Buffer menu item is not set to Disabled.
56 Standard USB port disabled • To clear the message, press .
The printer discards any data received through the USB port.
• Make sure the USB Buffer menu item is not set to Disabled.
58 Too many flash options 1 Turn off and unplug the printer.
2 Remove the excess flash memory.
3 Plug in the printer, and turn it on.
Message Action
To Next Page
Loading...
