Lexmark J110 - Page 320

Interfaces
8-22
AUTOFD* Receiver for the Lexmark C720
The following diagram illustrates the AUTOFD* receiver for the Lexmark C720.
AUTOFD* Receiver for the Lexmark J110
The following diagram illustrates the AUTOFD* receiver for the Lexmark J110.
FCT 2827
690 pF ±10%
+5V, 5%
GND
Connector
Pin
39 ohm ±5%
1.1K ohm ±10%
FCT 2828
or
690 pF ±10%
+5V, 5%
GND
Connector
Pin
39 ohm ±5%
1.1K ohm ±10%
FCT 2827,
FCT 2828, or
ASIC Pin (J110)