What to do if Lexmark J110 Printer shows a POST error?
A POST error on your Lexmark Printer indicates a hardware failure was detected during start-up. First, reset the print server. If the problem continues, call Customer Support.
How to fix Lexmark J110 Printer serial error due to serial settings mismatch?
To resolve a serial error on your Lexmark Printer due to a parity mismatch, you should adjust the serial port settings on either the print server or the printer to ensure they are identical.
What to do if Lexmark Printer shows serial error because printer was off during job?
If you encounter a serial error on your Lexmark Printer because the printer was turned off during a job, first turn the printer back on. The print server will then flush the current job. After that, resend the job.
To Next Page
General
