Lexmark J110 - Chapter 26: Appletalk and Marknet Print Server; Why You Need to Change the Appletalk Type; Before You Change the Setting; Change the Appletalk Type

105
26
AppleTalk and MarkNet print server
Why you need to change the AppleTalk type
The J110 printer requires that you change the AppleTalk type in order for you to print AppleTalk
network print jobs.
Before you change the setting
Verify your printer hardware setup is complete. Refer to the printer setup guide for detailed instructions.
Change the AppleTalk type
If you have TCP/IP available on your network, we recommend you assign an IP address to the
MarkNet print server. Running TCP/IP with your print server lets you use the full range of print
management tools and perform the easiest configuration.
Method 1 is an easy way to change the AppleTalk type for IP configured print servers. You can use
Method 2 as well.
If you are
not running TCP/IP, you must use Method 2.