Lexmark J110 - Advanced Status; Protocol; Honor Init; Parallel Mode 1

99
Advanced Status
With Advanced Status set to on, bidirectional communication is enabled through the parallel interface.
Protocol
When the protocol is set to Fastbytes, the printer receives information at a much faster transmission
rate, provided the host computer supports Fastbytes. When the protocol is set to Standard, the printer
receives information at a normal transmission rate.
Honor Init
This setting determines whether the printer honors hardware initialization requests from the computer.
Parallel Mode 1
This setting controls the pull up resistors on the parallel port signals. It is useful for personal
computers that have open collector outputs on the parallel port signals. This setting appears only if the
Parallel Port supports this feature.
Menu item Value
Advanced Status =Off
=On*
*Factory default
Menu item Value
Protocol =Standard
=Fastbytes*
*Factory default
Menu item Value
Honor Init =Off*
=On
*Factory default
Menu item Value
Parallel Mode 1 =Off*
=On
*Factory default