28
Loading tray 1 or tray 2
If you print on media that is different from what is loaded in tray 1 or tray 2, be sure to change the Paper
Size and Paper Type settings in your printer driver and the operator panel before printing your job.
Both tray 1 and the optional tray are loaded the same way. Do not load envelopes in either tray; always
load them in the manual feeder or multipurpose feeder.
1 Hold the tray tab and pull the tray completely out of the printer.
2 Squeeze the width guide and slide it all the way to the left.
3 Press the length guide button and slide it against the paper size indicator line that matches the
paper size you are loading.
To Next Page
Loading...
