22
From a Macintosh computer
1 Load one card into the manual feeder (or up to 50 if you are using the multipurpose feeder).
2 Open the File Menu from your software application.
3 Select Page Setup.
4 From Paper Size, select Edit Custom Paper Size.
5 Select New and and give your job a name, for example, Photo Card.
6 Select Card from the Kind tab.
7 Select the units, inches or millimeters.
8 Select the width, for example 4 in (102 mm).
9 Select the height, for example 6 in (152 mm).
10 Select Save.
11 Select Done.
12 Click OK to exit Page Setup.
13 Go back to the File Menu and select Print.
14 From the popup menu, select Paper Type/Quality.
15 From Paper Type/Quality, select Card Stock.
16 Click Print.
To Next Page
Loading...
