Lexmark J110 - Page 414

Index
X-2
drivers (continued)
SLCT
Lexmark C720 8-25
Lexmark J110 8-25
Lexmark T520 8-26
Lexmark T522 8-26
Lexmark T620 8-26
Lexmark T622 8-26
Lexmark W820 8-26
DSR protocol 8-37
DTR protocol 8-36
, 8-37
DTR/DSR protocol 8-36
, 8-37
E
edge to edge printing
See whole page setting
electrical specifications 7-2
envelope sizes supported 4-19
Lexmark C720 2-4
Lexmark J110 2-5
Lexmark T family 2-6
environmental commands and variables (PJL) 3-7
environmental conditions 7-6
errors, service 3-78
escape commands (PCL emulation)
categorized by function
color extensions 2-43
cursor positioning 2-31
font creation 2-36
font selection 2-33
job control 2-25
macros 2-36
miscellaneous commands 2-46
page control 2-27
picture frame 2-46
print model 2-37
raster graphics 2-40
rectangular area fill graphics 2-38
status readback 2-45
user-defined pattern 2-38
user-defined symbol set 2-35
external network adapter
See external print server
external print server
MarkNet Pro 8-49
MarkNet XLe 8-49
F
fastbytes protocol 8-17
file (flash memory or disk)
close 3-88
delete 3-91
format device 3-91
open 3-88
read 3-89
rename 3-91
run 3-90
write 3-90
filenames
file types 6-6
filename parameter (PJL) 3-87
macros, font, and symbol set ID 6-5
PostScript emulation conventions 6-9
searching 6-12
fittopageprinting2-8
, 2-9
flash memory
description 6-1
directory of contents 6-4
download target (PJL) 3-30
password protection 6-7
performance 6-13
Resource Data Collection mode 6-2
retrieval speed 6-13
rewriting contents 6-8
storing fonts, macros, and symbol sets 6-2
viewing the contents 6-3
fonts
PCL emulation
Lexmark C720 2-10
Lexmark J110 2-20
Lexmark T520 2-10
Lexmark T522 2-10
Lexmark T620 2-10
Lexmark T622 2-10
Lexmark W820 2-10
printing directory list for flash or disk 3-82
, 6-3
saving on flash memory or disk 6-3
selecting
MarkVision Professional 2-10
, 2-20
operator panel 2-10
, 2-20
setting password protection 3-92
formatting flash or disk, PJL 3-91