4 If the printer supports applications, then do the following:
a Click Apps > select the application > Configure.
b Click Export or Import.
Adding available options in the print driver
For Windows users
1 Open the printers folder.
2 Select the printer you want to update, and then do either of the following:
• For Windows 7 or later, select Printer properties.
• For earlier versions, select Properties.
3 Navigate to the Configuration tab, and then select Update Now ‑ Ask Printer.
4 Apply the changes.
For Macintosh users
1 From System Preferences in the Apple menu, navigate to your printer, and then select Options & Supplies.
2 Navigate to the list of hardware options, and then add any installed options.
3 Apply the changes.
Networking
Connecting the printer to a Wi‑Fi network
Note: This feature is available only in some printer models.
Before you begin, make sure that:
• Active Adapter is set to Auto. From the control panel, navigate to Settings > > Network/Ports >
> Network Overview > > Active Adapter > > Auto > .
• The Ethernet cable is not connected to the printer.
Using the control panel
1
From the control panel, navigate to:
Settings >
> Network/Ports > > Wireless > > Setup On Printer Panel > > Choose
Network >
2 Select a Wi‑Fi network, and then type the network password.
Note: For Wi‑Fi‑network‑ready printer models, a prompt to set up the Wi‑Fi network appears during initial
setup.
Set up, install, and configure 26
To Next Page
Loading...
