Menu item Description
E‑mail Alerts Setup
E‑mail Setup
User‑Initiated E‑mail
None
Use Device SMTP Credentials
Use Session User ID and Password
Use Session E‑mail address and
Password*
Prompt user
Set whether credentials are required for user‑initiated e‑mails.
E‑mail Alerts Setup
E‑mail Setup
Use Active Directory Device Credentials
O
On*
Enable user credentials and group designations to connect to
the SMTP server.
E‑mail Alerts Setup
E‑mail Setup
Device Userid
Specify the user ID to connect to the SMTP server.
E‑mail Alerts Setup
E‑mail Setup
Device Password
Specify the password to connect to the SMTP server.
E‑mail Alerts Setup
E‑mail Setup
Kerberos 5 REALM
Specify the realm for the Kerberos 5 authentication protocol.
E‑mail Alerts Setup
E‑mail Setup
NTLM Domain
Specify the domain name for the NTLM security protocol.
E‑mail Alerts Setup
E‑mail Setup
Disable “SMTP server not set up” error
O*
No
Disable an SMTP setup error message to appear on the
display.
Error Prevention
Jam Assist
O
On*
Set the printer to flush blank pages or pages with partial prints
automatically after a jammed page has been cleared.
Error Prevention
Auto Continue
O
On* (5 seconds)
Let the printer continue processing or printing a job
automatically after clearing certain printer conditions that
require user intervention.
Note: An asterisk (*) next to a value indicates the factory default setting.
Understanding the printer menus 42
To Next Page
Loading...
