Lexmark MS310

Load [paper source] with [paper size] [orientation]
‑ On
‑ On
If the printer control panel light sequence matches the light sequence in the preceding illustration, then try one or
more of the following:
• Load the tray or feeder with the correct size of paper.
• From the printer control panel, press to continue printing.
Note: If the printer finds a tray that has the correct size of paper, then it feeds from that tray. If the printer
cannot find a tray that has the correct size of paper, then it prints from the default paper source.
• From the printer control panel, press to cancel the print job.
62