Action Yes No
Step 1
a Move the width and length guides in the tray to the correct
positions for the size of the paper loaded.
b Resend the print job.
Is the print still skewed?
Go to step 2. The problem is
solved.
Step 2
a Check if you are printing on a paper that is supported by the
tray.
b Resend the print job.
Is the print still skewed?
Contact
customer
support.
The problem is
solved.
Printer is printing solid black pages
Action Yes No
Step 1
a Reinstall the imaging unit.
1 Remove the toner cartridge, and then the imaging unit.
Warning—Potential Damage: Do not expose the imaging
unit to direct light for more than 10 minutes. Extended
exposure to light may cause print quality problems.
2 Install the imaging unit, and then the cartridge.
b Resend the print job.
Is the printer printing solid black pages?
Go to step 2. The problem is
solved.
Step 2
Replace the imaging unit, and then resend the print job.
Is the printer printing solid black pages?
Contact
customer
support.
The problem is
solved.
Troubleshooting 182
To Next Page
Loading...
Need help?
General
