Lexmark MS415dn User Manual

Action Yes No
Step 1
a Print a font sample list to check if the fonts you are using are
supported by the printer.
1 From the printer control panel, navigate to:
> Reports > > Print Fonts >
2 Press the arrow buttons until PCL Fonts or PostScript
Fonts appears, and then press
.
b Use a font that is supported by the printer or install the font that
you want to use. For more information, contact your system
support person.
c Resend the print job.
Do prints still contain characters that have jagged or uneven
edges?
Go to step 2. The problem is
solved.
Step 2
a Use a font that is supported by the printer or install the font that
you want to use in your computer. For more information, contact
your system support person.
b Resend the print job.
Do prints still contain characters that have jagged or uneven
edges?
Contact
customer
support.
The problem is
solved.
MS315, MS415, and MS417 print quality problem
Characters have jagged or uneven edges
Troubleshooting 190

Lexmark MS415dn Specifications

General

Print Technology	Laser
Print Speed	Up to 40 ppm
Print Resolution	1200 x 1200 dpi
Processor Speed	800 MHz
Duplex Printing	Yes
Maximum Paper Size	8.5 x 14 inches
Operating System Compatibility	Windows, Mac OS, Linux
Memory	256 MB
Input Capacity	250 sheets
Connectivity	USB, Ethernet
Dimensions	10.3 x 15.7 x 15.0 inches