Lexmark MX310 Series User Manual

Print quality problems
Characters have jagged or uneven edges
Action Yes No
Step 1
a Print a font sample list to check if the fonts you are using are supported
by the printer.
1 From the printer control panel, navigate to:
Menus > Reports > Print Fonts
2 Select PCL Fonts or PostScript Fonts.
b Resend the print job.
Are you using fonts that are supported by the printer?
Go to step 2. Select a font that is
supported by the
printer.
Step 2
Check if the fonts installed on the computer are supported by the printer.
Are the fonts installed on the computer supported by the printer?
The problem is solved. Contact
customer
support.
Clipped pages or images
Leading edge
Trailing edge
ABCDE
ABCDE
ABCDE
Action Yes No
Step 1
a Move the width and length guides in the tray to the correct positions
for the paper loaded.
b Resend the print job.
Is the page or image clipped?
Go to step 2. The problem is solved.
Troubleshooting 207

Lexmark MX310 Series Specifications

General

Print Technology	Monochrome Laser
Print Resolution	1200 x 1200 dpi
Processor Speed	800 MHz
Standard Output Capacity	150 sheets
Scan Type	Flatbed, ADF
Fax Transmission Speed	33.6 Kbps
Input Paper Handling Standard	250-sheet input tray, 50-sheet multipurpose feeder
Functions	Print, Copy, Scan, Fax
Memory	256 MB
Connectivity	USB 2.0, Ethernet
Time to First Copy	As fast as 6.5 seconds
A4/Ltr Scan Speed Black	Up to 42/43 sides per minute
A4/Ltr Scan Speed Color	Up to 19/20 sides per minute
Media Types Supported	Card Stock, Envelopes, Labels, Plain Paper, Transparencies
Media Sizes Supported	A4, A5, A6, Legal, Letter
Standard Ports	USB 2.0, Ethernet
Maximum Paper Size	Legal
Operating System Compatibility	Windows, Mac, Linux
Duplex Printing	Automatic