Lexmark MX417 Series - Page 178

Use To
PDF Settings
PDF Version
1.2–1.7
A–1a
A–1b
PDF Compression
Normal
High
Secure PDF
O
On
Searchable PDF
O
On
Configure the PDF settings.
Notes:
• 1.5 is the factory default setting for PDF Version.
• Normal is the factory default setting for PDF Compression. This setting
appears only when a formatted, working hard disk is installed.
• O is the factory default setting for Secure PDF and Searchable PDF.
Secure PDF requires you to enter your password twice.
• To use the Searchable PDF option, purchase and install the AccuRead
OCR solution.
Content Type
Te xt
Graphics
Te xt /P ho to
Photo
Specify the content of the original document.
Note: Text/Photo is the factory default setting.
Content Source
Black/White Laser
Color Laser
Inkjet
Photo/Film
Magazine
Newspaper
Press
Other
Specify how the original document was produced.
Note: Black/White Laser is the factory default setting.
Color
O
On
Specify whether the printer captures and transmits content in color.
Note: On is the factory default setting.
Resolution
75 dpi
150 dpi
200 dpi
300 dpi
400 dpi
600 dpi
Specify the quality of the scan in dots per inch (dpi).
Note: 150 dpi is the factory default setting.
Darkness
1–9
Lighten or darken the output.
Note: 5 is the factory default setting.
Orientation
Portrait
Landscape
Specify the orientation of the scanned image.
Note: Portrait is the factory default setting.
Understanding the printer menus 178