Placing information on copies
Placing a header or footer on pages
1 Load an original document faceup, short edge
first
into the ADF tray or facedown on the scanner glass.
Notes:
• Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
• The ADF indicator light comes on when the paper is loaded properly.
2 If you are loading a document into the ADF tray, then adjust the paper guides.
3 From the home screen, navigate to:
Copy > Header/Footer
4 Select Header or Footer, and then touch .
5 Select where you want to insert the header or footer, then select a text option, and then touch .
6 Select where you want to print the header or footer, and then touch .
7 From the Header/Footer menu, touch > Copy It.
Placing an overlay message on each page
1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
• Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
• The ADF indicator light comes on when the paper is loaded properly.
2 If you are loading a document into the ADF tray, then adjust the paper guides.
3 From the home screen, navigate to:
Copy > Overlay > select an overlay message >
.
Note: The message choices are Urgent, Confidential, Copy, Custom, and Draft.
4 Tou ch Copy It.
Canceling a copy job
Canceling a copy job while the original document is in the ADF
When the ADF begins processing a document, touch Cancel Job on the printer control panel.
Copying 88
To Next Page
Loading...
