MX417 Regular cartridges
Item Worldwide
High yield toner cartridge 51B0HA0
For more information on countries located in each region, go to
www.lexmark.com/regions.
Ordering an imaging unit
Extremely low print coverage for extended periods of time may cause imaging unit parts to fail prior to
exhaustion of toner from toner cartridge.
For more information on replacing the imaging unit, see the instruction sheet that came with the supply.
Part name Lexmark Return Program Regular
Imaging unit 500Z 500ZA
Ordering a maintenance kit
Notes:
• Using certain types of paper may require more frequent replacement of the maintenance kit.
• The separator roller, fuser, pick rollers, transfer roller, and redrive assembly are all included in the
maintenance kit and can be individually ordered and replaced if necessary.
• Contact your service representative to replace the maintenance kit.
Maintenance kit Part number
100‑V maintenance kit
*
40X9146
110‑V maintenance kit 40X9135
220‑V maintenance kit 40X9136
* This is available only in Japan.
Ordering an ADF separator roller
Order an ADF separator roller when the ADF fails to pick paper or picks more than one sheet of paper at a time.
For information on replacing the ADF separator roller, see the instruction sheet that came with the part.
Part name Part number
Separator roller 40X9108
Storing supplies
Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing
until you are ready to use them.
Maintaining the printer 211
To Next Page
Loading...
