Lexmark MX417 Series - Page 237

Load multipurpose feeder with [custom type name] [orientation]
Try one or more of the following:
• Load the multipurpose feeder with the correct paper size and type.
• Depending on your printer model, touch Continue or press to clear the message and continue
printing.
Note: If no paper is loaded in the feeder, the printer manually overrides the request, and then prints
from an automatically selected tray.
• Cancel the current job.
Load multipurpose feeder with [paper size] [orientation]
Try one or more of the following:
• Load the multipurpose feeder with the correct paper size.
• Depending on your printer model, touch Continue or press to clear the message and continue
printing.
Note: If no paper is loaded in the feeder, the printer manually overrides the request, and then prints
from an automatically selected tray.
• Cancel the current job.
Load multipurpose feeder with [paper type] [paper size] [orientation]
Try one or more of the following:
• Load the multipurpose feeder with the correct paper size and type.
• Depending on your printer model, touch Continue or press to clear the message and continue
printing.
Note: If no paper is loaded in the feeder, the printer manually overrides the request, and then prints
from an automatically selected tray.
• Cancel the current job.
Load [paper source] with [custom string] [paper orientation]
Try one or more of the following:
• Load the tray or feeder with the correct size and type of paper.
• To use the tray that has the correct size or type of paper, select Finished loading paper on the printer
control panel. For non‑touch‑screen printer models, press
to
confirm.
Note: If the printer finds a tray that has the correct size and type of paper, then it feeds from that
tray. If the printer cannot find a tray that has the correct size and type of paper, then it prints from the
default paper source.
• Cancel the current job.
Troubleshooting 237