PostScript
4-88
PortLocation string (Read-only) Designates the physical location of the port related to the
parameter set. Supported values are:
Standard Port
Option Slot 1
Option Slot 2
Option Slot 3
Option Slot 4
PSSmartSwitch boolean Supported values are:
True PS SmartSwitch is set to On.
False PS SmartSwitch is set to Off.
For more information, see “Using SmartSwitch” on page 4-1.
Type name (Read-only) Always returns the value of /Communications.
Device Parameters for the Communication Device %Serial%, %SerialA%, %SerialB%, %SerialC%, %SerialD%
(%Serial_NV% and %Serial_Pending% contain the same parameters)
Baud integer Returns the value of the
Baud menu item.
CheckParity boolean (Read-only) Designates whether parity checking is done on the incoming
data. Supported values are:
Tr ue
Parity menuitemsettoEvenorOdd.
False
Parity menu item set to None or Ignore.
DataBits integer Returns the value of the
Data Bits menu item.
DelayedOutputClose boolean Selects how the printer manages the port at the end of each print job.
Supported values are:
True An end-of-file message is not sent until the current job and all
preceding jobs finish printing.
False An end-of-file message is sent as soon as a job finishes
executing in the interpreter, whether or not that job has
finished printing.
This value is set independently for each port.
Enabled boolean (Read-only)
Supported values are:
Tr ue
False
Filtering name Indicates if the input needs further filtering before the data can be correctly
processed. Supported values are:
InterpreterBased
None
Table 4-19: PostScript Emulation Device Parameters (Continued)
Key Type Definition
To Next Page
Loading...
Need help?
General