Lexmark Platinum Pro905 - Using the Printer Control Panel

Use the To
1
Scanner unit
• Access the ink cartridges and printhead.
• Remove paper jams.
2
Printhead Install, replace, or remove ink cartridges.
3 Ethernet port Connect your printer to a computer, a local network, an external DSL, or a cable modem.
4
USB port Connect the printer to a computer using a USB cable.
Warning—Potential Damage: Do not touch the USB port except when plugging in or
removing a USB cable or installation cable.
5
LINE Port Connect the printer to an active telephone line (through a standard wall jack, DSL filter,
or VoIP adapter) to send and receive faxes.
6
EXT Port Connect additional devices (telephone or answering machine) to the printer and the
telephone line. Use this port if you do not have a dedicated fax line for the printer, and
if this connection method is supported in your country or region.
Note: Remove the plug to access the port.
7 Power supply with port Connect the printer to a power source.
8
Duplex unit
• Print on both sides of a sheet of paper.
• Remove paper jams.
Using the printer control panel
The following diagrams explain the sections of the printer control panel:
Note: The icons are displayed when they are selectable on the current screen. If an icon is not displayed, then the
function is not available.
About your printer
9