Why is my Lexmark Pro715 All in One Printer printing blank pages?
If your Lexmark All in One Printer is printing blank pages, it might be due to improperly installed ink cartridges. Try reinstalling the ink cartridges, and then perform a deep clean and alignment of the printhead.
What to do if Lexmark All in One Printer does not print?
If your Lexmark All in One Printer print job does not print or is missing pages, try the following: * Ensure the ink cartridges are correctly inserted and click firmly into place. * Select your printer from the print dialog before sending the print job. * Make sure the print job is not paused. * Make sure your printer is set as the default printer. * Reconnect the printer power supply by unplugging it, waiting a moment, and then reconnecting it. * Remove and reconnect the USB cable connected to your printer. * Remove and reinstall the printer software.
What to do if Lexmark Pro715 is busy?
If your Lexmark All in One Printer is busy or not responding, first ensure that it is not in sleep mode by pressing any button to wake it up. If that doesn't work, try reconnecting the printer's power supply by unplugging it, waiting a few seconds, and then plugging it back in.
How to fix Lexmark Pro715 cannot print through USB?
If you cannot print through USB with your Lexmark All in One Printer, check the USB connection. Inspect the USB cable for any damage and ensure it is correctly connected to both the printer and your computer. Also, verify that the USB port is enabled in Windows through the Device Manager. If problems persist, remove and reinstall the printer software.
What to do if Lexmark Pro715 software did not install?
If the software for your Lexmark All in One Printer did not install correctly, uninstall it and then reinstall it. Before reinstalling, make sure your computer meets the minimum system requirements and temporarily disable any security programs in Windows.
Why my Lexmark Pro715 All in One Printer cannot send faxes?
If you cannot send faxes with your Lexmark All in One Printer, make sure that you have registered your user information in the printer settings. Additionally, try decreasing the transmission speed of the fax modem, enabling error correction, enabling automatic fax conversion, and ensuring that the dial prefix setting is correct.
Why Lexmark Pro715 All in One Printer cannot receive faxes?
If you cannot receive faxes on your Lexmark All in One Printer, ensure that you have configured the correct settings for your setup and that the printer is connected to an analog port. Also, verify that the printer memory is not full, fax forwarding is disabled, the ringer volume is sufficiently high, and you have the correct manual answer code.
What to do if cannot run the fax software on Lexmark Pro715 All in One Printer?
If you are unable to run the fax software for your Lexmark All in One Printer, ensure that a fax driver is installed and that the printer is connected to a telephone line.
How to launch Lexmark Pro715 All in One Printer CD manually?
If the installation screen did not appear during the installation of your Lexmark All in One Printer, you can manually launch the printer CD. For Windows, type D:\setup.exe in the Start Search box. For Macintosh, double-click the software installer package from the Finder.
General| PictBridge | Yes |
|---|---|
| Dimensions (WxDxH) | 465 x 403 x 251 mm |
| All-in-one functions | Copy, Fax, Print, Scan |
| Color all-in-one functions | copy, fax, print, scan |
| Print technology | Inkjet |
| Maximum resolution | 4800 x 1200 DPI |
| Print speed (black, normal quality, A4/US Letter) | 10 ppm |
| Print speed (color, normal quality, A4/US Letter) | 6 ppm |
| Digital sender | No |
| Printing colors | Black, Cyan, Magenta, Yellow |
| Maximum duty cycle | 10000 pages per month |
| Recommended duty cycle | 700 pages per month |
| Number of print cartridges | 4 |
| Page description languages | PCL 5c, PCL 6, PDF 1.6, PostScript 3 |
| Copier resize | 25 - 400 % |
| Maximum copy resolution | - DPI |
| Copy speed (black, normal quality, A4) | 14 cpm |
| Copy speed (color, normal quality, A4) | 7 cpm |
| Scanner type | Flatbed & ADF scanner |
| Input color depth | 48 bit |
| Maximum scan area | 216 x 356 mm |
| Optical scanning resolution | 1200 x 1200 DPI |
| Faxing | Color faxing |
| Modem speed | 33.6 Kbit/s |
| Total input capacity | 150 sheets |
| Maximum input capacity | 700 sheets |
| Auto document feeder (ADF) input capacity | 50 sheets |
| Envelopes sizes | 7 3/4, 9, 10, B5, C4, DL |
| Photo paper sizes | 10x15, 13x18 cm |
| Maximum print size | 216 x 297 mm |
| Paper tray media types | Banner, Card stock, Envelopes, Iron-On Transfers, Labels, Photo paper, Plain paper |
| Non-ISO print media sizes | 2l, Executive (184 x 267mm), Folio (media size), hagaki card, index card, l, Letter (media size), Oficio (media size), Statement (140 x 216mm) |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5 |
| Photo paper sizes (imperial) | 4x6, 5x7 \ |
| Borderless printing media sizes | 4x6, 2L, A4, B5, Hagaki card, L, Legal, Letter |
| Maximum ISO A-series paper size | A4 |
| Display | LCD |
| Display diagonal | 2.4 \ |
| Market positioning | Home & office |
| Standard interfaces | Ethernet, USB 2.0, Wireless LAN |
| USB 2.0 ports quantity | 2 |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Security algorithms | 802.1x RADIUS, EAP-TTLS, LEAP, MD5, PEAP, SSL/TLS |
| Supported network protocols (IPv4) | TCP/IP, AppleTalk, TCP UDP |
| Supported network protocols (IPv6) | TCP/IP |
| Internal memory | 256 MB |
| Processor frequency | 330 MHz |
| Sound pressure level (copying) | 49 dB |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (average operating) | 32 W |
| Package weight | 11960 g |
| Mac operating systems supported | Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion |
| Linux operating systems supported | RedHat EL Linux 4.0 U5, RedHat EL Linux 4.0 U6, RedHat EL Linux 4.0 U7, RedHat EL Linux 5.0, Solaris 10 U4, Solaris 10 U5, Ubuntu 10.04, Ubuntu 9.04, Ubuntu 9.10 |
| Server operating systems supported | Windows Server 2003, Windows Server 2003 x64, Windows Server 2008, Windows Server 2008 R2, Windows Server 2008 x64 |
| Windows operating systems supported | Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64 |
| Operating temperature (T-T) | 16 - 32 °C |
| Operating relative humidity (H-H) | 8 - 80 % |
| Sustainability certificates | ENERGY STAR |
| Certification | CSA, c-UL-us, ICES Class B, Executive Order 132221, CE Class B, CB IEC 60950 IEC 60825-1, GS (TÜV), SEMKO, C-tick mark Class B, V85, CCC Class B, BSMI Class B, METI(PSE), VCCI Class B, FCC Class B, UL 60950 3rd Edition, CCIB |
Weight and Dimensions| Weight | 9090 g |
|---|
General information about the printer, its features, and benefits.
Information on ordering various types of Lexmark ink cartridges for the printer.
Step-by-step instructions for removing and installing ink cartridges.
Information on ordering paper and other printer supplies from Lexmark.
How to replace the language labels on the printer's control panel buttons.
Explanation of the function of each button on the printer's control panel.
Adjusting the printer's sleep mode timer for energy efficiency.
How to reset all printer settings to their original factory defaults.
Explanation of what printer shortcuts are and how they function.
Step-by-step process for creating new printer shortcuts for tasks.
How to edit or remove existing printer shortcuts.
Specifies the system requirements for installing the printer software.
Detailed instructions for using the printer software on Windows.
Instructions for using the printer software on Macintosh.
Steps to find and install additional software for the printer.
Step-by-step guide for loading paper into the main paper tray.
Specific instructions for loading envelopes and photo paper correctly.
Guidance for loading different types of paper, including coated and glossy.
How to configure default paper size and type settings for print/copy/scan jobs.
General advice for achieving better print quality and results.
Step-by-step instructions for printing standard documents.
Guide to printing multiple pages per sheet (N-Up printing).
Guidance for printing specialized media like envelopes and labels.
Lists supported file formats for documents and images for printing/scanning.
How to connect and use a USB flash drive with the printer.
Steps to print photos directly from a flash drive.
How to print photos directly from a PictBridge-compatible camera.
How to locate the print queue for your printer on Windows and Macintosh.
How to designate the printer as the default printing device.
How to temporarily stop print jobs on Windows and Macintosh.
Steps to cancel print jobs from the printer or computer.
Best practices for achieving optimal copying results.
Step-by-step guide for making copies of documents.
Instructions for copying both sides of an ID card onto a single page.
How to scale documents or photos during the copying process.
Best practices for optimal scanning results.
Steps for scanning documents directly to a connected computer.
How to scan documents to a shared network computer.
Scanning photos directly into photo editing software.
Initial configuration steps for the printer's email function.
How to send emails using the printer, either from ADF or scanner glass.
Detailed scenarios for connecting the printer to different telephone line types.
Step-by-step guide for sending faxes from the printer's control panel.
Setting up the printer to automatically answer and receive faxes.
A checklist for diagnosing fax connection and setup problems.
Step-by-step process for connecting the printer to a wireless network.
Overview of wireless security protocols (WPA2/WPA, WEP).
Required information (SSID, security key) for wireless setup.
Advanced configurations for wireless network setup.
Procedures for checking ink levels and maintaining ink cartridges.
Steps to align the printhead for optimal print quality.
Procedures for cleaning printhead nozzles to resolve print quality issues.
How to clean the scanner glass for clear scans.
A checklist of basic steps before attempting to troubleshoot printer issues.
Solution for changing the printer display language.
Troubleshooting steps if printer software fails to install.
Solutions for print jobs that do not complete or have missing pages.
Detailed steps for clearing paper jams within the printer.
How to access and clear jams from the printer's jam clearance area.
How to clear paper jams from the printer's exit tray.
Instructions for clearing paper jams from the duplex unit.
Troubleshooting steps for print quality issues at the page edges.
Steps to resolve streaks or lines appearing on printed images.
Troubleshooting steps to improve slow print speeds.
Addressing performance issues where the computer slows during printing.
Troubleshooting steps when the copier or scanner is unresponsive.
Steps to improve copy and scanned image quality.
Steps to resolve unsuccessful scan attempts.
Troubleshooting scanning processes that are slow or cause the computer to freeze.
A checklist for diagnosing fax connection and setup problems.
Troubleshooting steps for issues preventing fax transmission.
Troubleshooting steps for issues preventing fax reception.
Explanations and solutions for various fax error messages displayed by the printer.
A checklist to verify network setup and connectivity.
Steps to ensure proper wireless network configuration and connectivity.
Troubleshooting steps when the 'Continue' button is inactive.
Troubleshooting steps if the printer cannot print wirelessly.
Disconnecting from VPNs to allow access to the local wireless network.
Restarting the wireless router to refresh network connections.
Identifying and reducing factors causing network congestion.
Identifying and reducing sources of wireless signal interference.
Basic product details including name, machine type, and model.
Information about the manual's edition, copyright, and revision history.
FCC compliance details for digital devices and radio frequency energy.
Measured noise emission levels for the printer in various operating modes.
Lexmark's warranty coverage for product manufacturing and materials.
Procedures and requirements for obtaining warranty service.
Limitations and exclusions of the product's warranty coverage.
Legal agreement governing the use of Lexmark software programs.
To Next Page
