5 Set the color, quality, original image size, and the other scan options. If necessary, press each time you make
a selection.
6 Press .
Follow the instructions on the display. The scan is complete when a message appears on the printer control
panel indicating that the file you scanned has been saved.
Scanning photos into an editing application
For Windows users
1 Load a photo or photos.
2 Click or Start.
3 Click All Programs or Programs, and then select the printer program folder from the list.
4 Navigate to:
Printer Home > select your printer > Scan
• If you want to scan a single photo, or multiple photos as a single image, then select Single photo.
• If you want to scan multiple photos at once and save them as separate images, then select Multiple photos.
Note: Allow at least 1/4 inch of space between photos if you want to scan multiple photos at once and save
them as separate images.
Scanning starts and the scan progress dialog appears.
5 Save the photo or photos, and open them in a photo editing application to edit.
For Macintosh users
Notes:
• Use any application (such as Image Capture) that supports your printer and lets you work with photos.
• For more information, select the application you want, and then search for Scanning an image in the
Search field of the Help menu.
• If applicable, click
?
on the preview dialog.
Using Image Capture
1 Load a photo or photos.
2 From the Applications folder in the Finder, double‑click Image Capture.
3 From the list of devices, select your printer.
4 Adjust the scan settings as needed.
To preview the image, click Overview.
Note: The preview feature is available only when scanning from the scanner glass.
5 From the Scan To pop‑up menu, choose a photo editing application.
6 Click Scan.
Scanning
66
To Next Page
Loading...
