3 Wipe the printhead contacts(1) and nozzles(2) using a clean, lint‑free cloth.
1
2
4 Wipe the contacts inside the printhead carrier.
5 Reinsert the printhead, and then close the latch until it clicks into place.
6 Close the printer.
Note: If removing and reinserting the printhead does not resolve the error, then turn the printer off and then back
on. If the problem persists, then contact customer support.
Printhead Warning
One or more cartridges may have been missing for more than two hours since the printer was turned on.
Clean or Deep Clean the printhead to restore print quality.
A cleaning page prints.
Troubleshooting
142
To Next Page
Loading...
