IF THE PRINTER AND DESTINATION RESIDE IN DIFFERENT DOMAINS, THEN MAKE SURE THAT THE
DOMAIN
INFORMATION IS SPECIFIED
From the Embedded Web Server, access the configuration page for the application, and then enter the appropriate
Windows domain information.
CONFIGURE THE FIREWALL TO ALLOW COMMUNICATION WITH THE SUBNET IN WHICH THE
PRINTER
RESIDES, OR SET UP THE DESTINATION IN THE SAME SUBNET AS THE PRINTER
For more information, contact your system administrator.
MAKE SURE THAT THE NETWORK IS FUNCTIONING AND THAT THE PRINTER CAN COMMUNICATE
WITH
THE NETWORK
For more information, see the Networking Guide.
MAKE SURE THAT USERS HAVE PERMISSION TO SAVE SCANS TO THE DESTINATION
From the Embedded Web Server, access the configuration page for the application, then make sure that the correct
authentication type is selected, and that the correct user credentials are entered.
Troubleshooting 11
To Next Page
Loading...
Need help?
General