Configuring the application
Configuring the network and e‑mail function of the printer
The application uses the network and e‑mail server setup and options of the printer. Before running the application,
complete the network and e‑mail server setup. For more information, see the printer User’s Guide.
Configuring output options
1 From the Embedded Web Server, access the configuration page for the application.
2 Adjust the settings.
• Print output—Print the scanned card.
• Email output—Send the scanned card as an e‑mail attachment.
• Network Share Output—Save the scanned card to a network folder.
• Scan file format—Specify the output format of the scanned card.
• E‑mail Settings
– Default e‑mail address—Type e‑mail addresses, separated by a comma.
• Network Share Settings
– Destination Server Address—Type the address of the network folder. Example:\\server\share.
– Domain (Optional)—Type the domain to connect to the network folder.
– Username—Type the user name to connect to the network folder.
– Password—Type the password to connect to the network folder.
– Authentication Type—Select the authentication type for the network folder.
– Append Timestamp—Add a time stamp to the file name.
3 Apply the changes.
Configuring scanning options
1 From the Embedded Web Server, access the configuration page for the application.
2 Adjust the settings.
• Default tray—Select the default tray used during printing.
• Default number of copies—Select how many copes to print for each scanned image.
• Default contrast setting—Increase or decrease the level of contrast when a copy of the scanned card is printed.
Select Best for Content to adjust the contrast automatically.
• Default scale setting—Set the size of the scanned image.
• Color Output—Print images in color.
• Resolution setting—Adjust the quality of the scanned image.
Configuring the application 4
To Next Page
Loading...
