Using the application
Loading cards on the scanner glass
Place the cards facedown on the scanner glass, and then flip them over when prompted.
Notes:
• Make sure to leave at least a 10‑mm (about 0.5‑inch) space between the edge of the scanner glass and the
cards.
• When scanning a single card, do not exceed the dimensions of an A5‑size paper.
• When scanning multiple cards, do not exceed the dimensions of a legal‑size paper. You can scan up to three
cards at one time, but make sure to leave at least a 30‑mm (about 1‑inch) space between the cards.
For printers: For scanner options:
Using the application 6
To Next Page
Loading...
Need help?
General