122
Too many flash options
What this light sequence means:
Too many flash memory options are installed on the printer.
What you can do:
• Turn off and unplug the printer. Remove the excess flash
memory. Plug in the printer and turn it on.
• Press and release Continue to clear the message.
Jam in an input area
What this light sequence means:
A jam has occurred in an area where print media enters the printer
from a source.
What you can do:
Clear the jam and the entire paper path:
1 Open the upper front door.
2 Remove the print cartridge.
3 Remove the jam.
4 Replace the print cartridge.
5 Close the upper front door.
6 Press and release Continue to clear the message.
See Jam in input area for more information.
To Next Page
Loading...
