63
15
Determining the status of supplies
The printer operator panel light sequences tell you about the status of your supplies.
If the print cartridge becomes low on toner, one of the following light sequences is displayed:
When the printer issues one of these messages, you can continue to print a few hundred pages. For
more information, see Ordering supplies.
If tray 1 or tray 2 becomes empty, the following light sequence is displayed:
Toner Low light
message when
the Toner Alarm
is set to On.
Toner Low light
warning when
the Toner Alarm
is set to Off.
To Next Page
Loading...
