Lexmark T420 - Network Menu

129
MAC Binary PS
Purpose: To configure the printer to process Macintosh binary PostScript print jobs.
Values:
Off - Printer filters PostScript print jobs using standard protocol.
On - Printer processes raw binary PostScript print jobs from computers using the Macintosh operating
system.
Note: This setting often causes Windows print jobs to fail.
Auto* - Printer accepts print jobs from computers using either Windows or Macintosh operating
systems.
Network menu
Use the Network menu to change printer settings affecting jobs sent to the printer through a network
port (either Standard Network or Network Opt <x>).
Note: An asterisk indicates the factory default value.
NPA Mode
Purpose: To specify whether the printer performs the special processing required for bidirectional
communication, following the conventions defined in the Network Printing Alliance (NPA) Protocol.
Note: Changing this menu item resets the printer.
Values:
Off - Printer does not perform NPA processing.
On - Printer performs NPA processing.
Auto* - Printer examines the data to determine the format, and then processes it appropriately.
MAC Binary PS
Purpose: To configure the printer to process Macintosh binary PostScript print jobs.
Values:
Off - Printer filters PostScript print jobs using standard protocol.
On - Printer processes raw binary PostScript print jobs from computers using the Macintosh operating
system. This setting often causes Windows print jobs to fail.
Auto* - Printer processes print jobs from computers using either Windows or Macintosh operating
systems.