131
34
Restoring factory defaults
You can make changes to printer settings or values by using the menus available through the Printer
Settings Configuration sheet, PJL commands, or the Local Printer Setup Utility. For more information,
see Printing the Printer Settings Configuration sheet. To restore the original printer settings
(factory default settings):
1 Turn the printer off.
2 Open the upper front door.
3 Press and hold Continue as you turn the printer on. All the lights cycle.
4 Release Continue.
5 Close the upper front door. The light sequence that represents the Home menu is displayed.
A Printer Settings Configuration sheet prints.
To Next Page
Loading...
