7
Position the printer
b Remove the trays.
c Attach locking clips at the
insertion point between the top
drawer and the printer.
There are two insertion points
in the front and two in the rear.
d Attach locking clips at the
insertion point between any
optional drawers.
There are two insertion points
in the front and two in the rear.
e Insert the trays into the printer.
3 Remove any tape or packing
material from the outside of the
printer.
What do I do next?
Task Go to page…
Install an optional duplex unit 8
Install the print cartridge 11
To Next Page
Loading...
