34
Attach cables
Step 9: Attach cables
CAUTION! Do not connect or
disconnect a communication
port, a teleport, or any other
connector during a lightning
storm.
The printer can be attached to a network or locally (directly to a
computer).
Setting up for
network printing
You can attach your printer to a network using standard network
cables.
Note: A 10BaseT/100BaseTX
Fast Ethernet port is standard
on the Lexmark W812n.
To attach the printer to a network:
1 Make sure the printer is turned off and unplugged.
2 Connect the printer to a LAN drop or hub using standard
cabling that is compatible with your network:
• Token-Ring or Ethernet 10BaseT/100BaseTX networks
(Category 5 Ethernet cable with a RJ-45 connector)
• Token-Ring networks (Shielded Twisted Pair cable with a
DB9 connector)
• Ethernet 10Base2 networks (Thin Coax cable with a
BNC T-connector)
To Next Page
Loading...
